Pengenalan Aspek Ergonomi pada Penataan Operasional Bongkar Muat Pasar Giwangan Yogyakarta
DOI:
https://doi.org/10.58184/mestaka.v5i2.917Keywords:
Ergonomics, Market, Manual Material Handling, Informal Porters, CirculationAbstract
Traditional markets act as food-logistics nodes with intensive unloading activities and manual handling that may increase musculoskeletal risk, internal congestion, and reduced accessibility due to layout and hygiene issues. This community-service paper is developed from a field assessment at Pasar Giwangan, Yogyakarta, conducted during 3 months (April–June 2020), and translated into an ergonomics socialization package, critical point mapping of circulation, and practical recommendations for loading and unloading operations. Key findings include heavy carrying (>50 kg) by informal porters with 2–5 repetitions per task, peak-hour congestion, reduced effective lane width caused by access configuration, and improper waste disposal that disturbs comfort and mobility. Proposed outputs include OSH ergonomics materials, strengthening handling aids (trolleys), and circulation/zonation adjustments for unloading activities.
Downloads
References
Eldrin, G. J., & Sarvia, E. (2021). Desain Alat Bantu Trolley Ergonomis Di Depo Pasar Ikan Kota Tasikmalaya. Jurnal Teknik Industri, 7(1).
Fauzi, A., & Mardiana, C. (2019). Redesain Sarana Pengangkut Bahan Makanan, Sayur Dan Buah Untuk Bongkar Muat Di Pasar Tradisional (Studi Kasus Pasar Tradisional Dtc Surabaya). Seminar Teknologi Perencanaan, Perancangan, Lingkungan, Dan Infrastruktur, 350.
Hayu, M., Sita, R., & Sari, R. (2020). Penilaian Aspek Ergonomi Terhadap Buruh Angkut Arang. Jurnal Inkofar, 1(1), 2581–2920. http://www.politeknikmeta.ac.id/meta/ojs
Hendrarini, L., & Suwarni, A. (2016). Faktor Faktor Kejadian Musculoskeletal Disorders (MDS) Pada Tenaga Kerja Informal (Kuli Panggul). Jurnal Teknologi Kesehatan, 12(1), 47–51.
Hendrawan, A. T., Zainal Muttaqin, A., Eka, A., & Febrianto, W. (2023). Kajian Risiko Ergonomi Pada Kuli Angkut Pasar Agrobisnis Plaosan Magetan. Jurnal Heuristic, 20(2).
Hutagalung, R. (2013). Perbaikan Kualitas Kerja Dengan Menerapkan Pendekatan Ergonomi Meningkatkan Produktifitas Buruh Angkat Angkut Tradisional Di Pasar Badung Denpasar. ARIKA, 7(1).
Isriyanti, N., & Rivai, A. (2019). Gambaran Aktivitas Penjahit Dengan Keluhan Low Back Pain Ditinjau Dari Segi Ergonomi Di Pasar Sentral Kota Makassar. Jurnal Sulolipu : Media Komunikasi Sivitas Akademika Dan Masyarakat, 19(2).
Kurnianingtyas, C. D., & Sukma, H. P. (2022). Analysis of Work Posture and Manual Handling on the Material Transport Activities of Indonesian Traditional Market Worker. International Journal of Industrial Engineering and Engineering Management, 4(2), 65–74. https://doi.org/10.24002/ijieem.v4i2.5921
Masayuki, N. P. F., Pramita, I., & Vitalistyawati, L. P. A. (2022). Hubungan Sikap Kerja Duduk Dan Durasi Kerja Terhadap Keluhan Musculoskeletal Pada Pedagang. Jurnal Ilmiah Fisioterapi (JIF), 05(1), 8–14.
Prahastuti, B. S., Djaali, N. A., & Usman, S. (2021). Faktor Risiko Gejala Muskuloskeletal Disorder (MSDs) pada Pekerja Buruh Pasar. Jurnal Ilmiah Kesehatan, 13(1), 47–54. https://doi.org/10.37012/jik.v13i1.516
Pratiwi, H. M., Widjasena, B., & Suroto. (2015). Analisis Praktik Menggendong pada Buruh Gendong Wanita di Pasar Induk Buah pada Sayur Giwangan Kota Yogyakarta. Jurnal Kesehatan Masyarakat, 3(2), 147–157. http://ejournal-s1.undip.ac.id/index.php/jkm
Santoso, P. N. (2020). Lingkungan Kerja Ergonomis dalam Perspektif Disabilitas (Literature Review). Journal of Industrial and Engineering System, 1(2), 75–88.
Saryanto. (2014). Kajian Ergonomi dan K3 untuk Meningkatkan Kualitas Layanan pada Sarana Jual Komoditas Hasil Perikanan Pasar Ciroyom Bandung Bandung 40124. https://lib.itenas.ac.id/kti/wp-content/uploads/2014/03/kajian-ergonomi-K3-pasar-ciroyom-bandung.pdf
Tarwaka, HA. Bakri, S., & Sudiajeng, L. (2004). Ergonomi untuk Keselamatan, Kesehatan Kerja dan Produktivitas (1st ed., Vol. 1). UNIBA PRESS.
Zyahri, M., & Purnomo, H. (2020). Pengembangan Desain Produk Trolley Menggunakan Metode Kano. IENACO.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Prasidananto Nur Santoso, Marni Astuti, Riani Nurdin, Esa Rengganis Sullyartha, Uyuunul Mauidzoh, Gunawan, Eko Poerwanto, Yasrin Zabidi, Sidik Budiwidodo
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors submitting manuscripts do so with the understanding that if accepted for publication, the article's copyright will be given to the Author. Copyright includes the right to reproduce and transmit articles in all forms and media, including reprints, photographs, microfilm, and other similar reproductions, as well as translations.
The editors of Mestaka make every effort to ensure that no false or misleading data, opinions, or statements are published in the journal. However, the content of articles and advertisements published on Mestaka is the responsibility and responsibility of the authors and advertisers respectively.
Users of this website will be licensed to use the materials from this website in accordance with the Creative Commons International License 4.0 (CC-BY-SA). No fees are charged. Please use the appropriate materials.
Copyright by Mestaka: Media Pusat Pengabdian Kepada Masyarakat uses the latest version of the CC-BY-SA license, which grants the most extensive rights to authors. All articles published by Mestaka are considered to have been released under the Creative Commons International License 4.0 (CC-BY-SA). These are open-access articles distributed under the terms of the Creative Commons International License 4.0 (CC-BY-SA).
Please download the Author's Declaration. The author's declaration form must be completed in relation to the article, signed the original, and sent a scanned document file (softcopy) to our email mestaka@pakisjournal.com or sent to the Editorial Office in the form of an original hard copy and the article in softcopy form.
Creative Commons License
This work is licensed under the Creative Commons International License 4.0 (CC-BY-SA)
